Five Feet of Rivers

Posted On September 7, 2015

Happy Labor Day. For my labor of the day, I finished off some river pieces.

A single piece of 3-inch by 24-inch bass wood was enough to make five feet of rivers. Using the RAW, you’ll never need more than 36-inches of river, but with three lengths of unbroken river, on bridge, and two fords, you’ve got enough pieces to make any of the setups listed in the rulebook. There was even enough wood left over to add a curve and short make-up length.

That short length is important for my setup because my mat is actually 30-inches wide by 34-inches wide. So three lengths of 10-inches works great one way, but leaves a small gap when laid out the other way. That short piece fills it in nicely.

May need to rethink that road piece left of the bridge. That
bridge is a metal cast bought from Heroics and Ros.

Here’s a better shot of one of the fords, with the pond in the back to show the matching water colors. It doesn’t show up all that well in the photo, but after sealing these pieces with dullcote, a second coat of gloss finish was applied to the water itself to give it a nice wet shine.

Knights defending a ford. Because using heavy mounted troops
to defend a static defense line is the mark of a good leader.

This is the classic war-game color for streams. In nature they only look this blue when they reflect a clear blue sky. On the wargaming table that color makes it clear what the feature represents, and provides a nice stark contrast against the ground surface. It’s only a cliche because it works. For more in-depth reading, there’s a great comparative analysis over on Wargaming With Barks. Check it out.